All steel fume hoods
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
طريقة دفعة آمنة وموثوقة باستخدام منصة عبرة للدفع عبر الانترنت
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
حماية المشتري
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
مواصفات المنتج
| الماركة | Shanghai DaAo Safety Protection |
| الحالة | New |
| الكفالة | YES |
مواصفات المنتج
Steel fume hood material specification
a resist material
1-1 countertops resist: high-quality 12.7mm US Wilsonart solid physiochemical board table, and the leading edge was thickened to 25.4mm thick arc with liquid leakage prevention function .
Second, the upper part of the cabinet
2-1 Case Material: 1.0mm thick with a new high-quality cold-rolled sheet, the anode plate membrane treatment. Acid and alkali paint EPOXY coating treatment.
2-2. Inner material (side plate, back plate, top plate, deflector plate): adopt 6mm thick anti-Beit plate, acid and alkali and organic solvent.
2-3. Baffle holder: PC material one piece molding, activity combined into a convenient demolition, and a fixed composite frame function.
2-4 sets hood: a 5mm thick PP material produced
2-5 auxiliary half-moon holes: the use of high-quality 1.0mm thick cold-rolled sheet, the hydraulic forming one, EPOXY coating.
Third, adjust the door system
. 3-1 activities sliding door: single up or down, with a balancing device, sliding door can be stopped at any point of activity.
3-2. Sliding door glass: 5mm thick tempered glass.
3-3. Sliding door suspension cable: cable tension of 450 kg.
3-4. Windows chute: the use of PP material.
Fourth, the power supply apparatus
4-1 operational dashboard: thin-film micro-electronic circuit of the touch control panel, standard power supply, lighting, motors, spare (switch) and LED running lights.
4-2. Protection devices: power, motor, socket, leakage, overload, phase loss, reverse and other fault protection.
4-3. Lighting device: 30W fluorescent lamp.
4-4. Socket: 220V grounded single-phase socket.
V. drainage
5-1 laboratory Cup slot: integrally molded with PP, thickness 3mm flexible, and acid, heat and organic solvents. Size: L260 * W148 * 220mm.
Sixth, the water supply device:
6-1 water faucet: single statements using copper faucet.
Seven, the lower part of the cabinet (general counter-bottom):
7-1 back, sides, panel: adopt 1.0mm thick cold rolled plate production, EPOXY coating, acid and organic solvents.
7-2. Door: 1.0mm thick cold-rolled plate production, the EPOXY spray treatment, acid and organic solvents.
7-3. Handle: C type metal handle.
7-4. Hinge: The use of metal hinges.
\
