Environmental Chamber with UTM Integration
Availability: in stock
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Condition | New |
| Brand | Tunix Corporation |
| Fuel Type | Electric |
Product Descriptions
Test Chambers are high customised product & prices depends upon the specific requirements, quote will be shared after understanding technical requirements, hence One Dollar is mentioned request to reach us for quotation & technical discussion for requirements.
Internal Volumes(L)
TCU
Temperature range
Internal Material
Material
Temperature Fluctuation ±0.1°C
Temperature uniformity
Temperature
External Material
Thermal Insulation
Fan
Refrigeration Compressor
Internal test chamber is manufactured with
Stainless steel
Exterior material shall be made of min 2mm thick
CRCS with powder coated panels/door with impressive
precision & aesthe
cs
Internal test chamber and outer body is isolated
using mineral wool ensuring no air pockets and zero
conduction and heat losses
Single moulded light weight high cfm coaxial fan for
uniform air circula
on.
Danfoss, Frascold and Bitzer
Refrigerant R404a and R23
Cooling mode Air-Cooled/Water Cooled
Evaporator
Evaporator heat exchanger coils are made with
oxidize free materials with full collared bullet
expanded forhighly efficient heat transfer and higher
efficiency.
Heater
Working Temprature
50 liters to 1400 liters
power Supply
-40°C to 180°C and - -70°C to 180°C
Ramp rate 1/2/3//4/5 °C/Min
7” Red Lion (HMI) & Siemens (PLC)
< 1000 Litres: ≤1.5°C.
1000 to 2000 Litres: ≤2.0°C.
> 2000 Litres: ≤2.5°C.
25-30 °C AND 10-90% RH
Controller
Inconel material sheathed/ bare nichrome air
heaters to achieve the set temperature.
Power requirement: 415VAC /-5%,
3 Phase 50/60 Hz, 4 wire E.
\
