Name: For Wind Power Farm
Rating: 5 (22 reviews)

Teklif İste

<table>
<tr>
<td>
<table>
<tr>
<td>
With the global requirements for energy becoming more and more pressing, traditional energy resources such as coal, petroleum and natural gas being consumed at higher and higher rate, human paying more and more attentions to environment protection and technology changing quickly along with each passing day, the newly emerging wind power electricity, as a type of reproducible resource, gains rapid development and becomes a new main force among the newly built power plant.
</td>
<td></td>
</tr>
</table>
</td>
</tr>
<tr>
<td>
      Under this flourishing circumstance, Pearl designs and develops a new type of low-loss transformer substation for wind power plant on the basis of the existing pad-mounted transformer and pre-fabricated transformer. It has now received wide reorganizations by customer.
</td>
</tr>
<tr>
<td>
Normal Service Condition: Ambient temperature:       Maximum: +40℃       Minimum: -25℃       Maximum average monthly temperature: +30°C Relatively humidity: at 25℃       Average daily RH not more than 95%       Average monthly RH not more than 90% Altitude above seal level: Less than 1000m. Quakeproof: less than 3m/s2 horizontally and 1.5m/s2 vertically. Installation environment: No obvious dirtiness, no explosive and corrosive gas or powder. The installation                         site should have good air ventilation and no furious vibration and shocking forces. Note:       If the on-site conditions are not within the above ranges, please contact us for further application information. Main Specifications: 
</td>
</tr>
<tr>
<td>
<table>
<tr>
<td>Rated Power kVA</td>
<td>Active Part</td>
<td>Rated Volt. V</td>
<td>No-load Loss W</td>
<td>Load loss W</td>
<td>Short-circuit Impedance ％</td>
<td>Load Current％</td>
<td>Vector Group</td>
</tr>
<tr>
<td>
600
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
790
</td>
<td>
7500
</td>
<td>
6.5
</td>
<td>
0.9
</td>
<td>
Dyn11 Yyn0
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
780
</td>
<td>
6000
</td>
<td>
4.5
</td>
<td>
0.6
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
315
</td>
<td>
7500
</td>
<td>
6.5
</td>
<td>
0.4
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
300
</td>
<td>
6000
</td>
<td>
4.5
</td>
<td>
0.3
</td>
</tr>
<tr>
<td>
750
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
940
</td>
<td>
8850
</td>
<td>
6.5
</td>
<td>
0.7
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
930
</td>
<td>
7100
</td>
<td>
4.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
380
</td>
<td>
8850
</td>
<td>
6.5
</td>
<td>
0.4
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
360
</td>
<td>
7100
</td>
<td>
4.5
</td>
<td>
0.3
</td>
</tr>
<tr>
<td>
900
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
1060
</td>
<td>
10350
</td>
<td>
6.5
</td>
<td>
0.7
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
1050
</td>
<td>
8900
</td>
<td>
4.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
440
</td>
<td>
10350
</td>
<td>
6.5
</td>
<td>
0.4
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
420
</td>
<td>
8900
</td>
<td>
4.5
</td>
<td>
0.3
</td>
</tr>
<tr>
<td>
1300
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
1430
</td>
<td>
14300
</td>
<td>
6.5
</td>
<td>
0.6
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
1420
</td>
<td>
12350
</td>
<td>
4.5
</td>
<td>
0.4
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
570
</td>
<td>
14300
</td>
<td>
6.5
</td>
<td>
0.3
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
550
</td>
<td>
12350
</td>
<td>
4.5
</td>
<td>
0.2
</td>
</tr>
<tr>
<td>
1500
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
1570
</td>
<td>
15750
</td>
<td>
6.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
1560
</td>
<td>
13800
</td>
<td>
4.5
</td>
<td>
0.4
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
630
</td>
<td>
15750
</td>
<td>
6.5
</td>
<td>
0.3
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
600
</td>
<td>
13800
</td>
<td>
4.5
</td>
<td>
0.2
</td>
</tr>
<tr>
<td>
1600
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
1660
</td>
<td>
16500
</td>
<td>
6.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
1640
</td>
<td>
14500
</td>
<td>
4.5
</td>
<td>
0.4
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
650
</td>
<td>
16500
</td>
<td>
6.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
630
</td>
<td>
14500
</td>
<td>
4.5
</td>
<td>
0.2
</td>
</tr>
<tr>
<td>
2500
</td>
<td>
11-series
</td>
<td>
35000/690
</td>
<td>
2450
</td>
<td>
19500
</td>
<td>
6.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
2310
</td>
<td>
20200
</td>
<td>
5.5
</td>
<td>
0.3
</td>
</tr>
<tr>
<td>
Amorphous Alloy
</td>
<td>
35000/690
</td>
<td>
970
</td>
<td>
19500
</td>
<td>
6.5
</td>
<td>
0.5
</td>
</tr>
<tr>
<td>
10000/690
</td>
<td>
900
</td>
<td>
20200
</td>
<td>
6
</td>
<td>
0.2
</td>
</tr>
</table>
</td>
</tr>
<tr>
<td>
Note: 1, Yyno connection symbol is not recommended for amorphous alloy transformer. 2, The above specifications are for reference only. For more detailed or customized specifications, please contact us.
</td>
</tr>
</table>

Miktar

Gönderi Ülkesi

: 20-feb-2017 tarihinden beri üyedir

PEARL ELECTRIC CO., LTD.

Temel Üyelik

DASHBOARD'A GİT

Teklif İste

Miktar

Gönderi Ülkesi

Jeneratör

For Wind Power Farm

Öne Çıkanlar:

Asgari Sipariş : 50
Koşul : New
Garanti : YES
Nakliye Ülkesi :

Abraa güvenli ticaret sistemlerini kullanarak güvenli ve emniyetli ödemeler

Ürün Detayları

Ürün Özellikleri

	Pearl Electric
	New
	YES

Product Descriptions

With the global requirements for energy becoming more and more pressing, traditional energy resources such as coal, petroleum and natural gas being consumed at higher and higher rate, human paying more and more attentions to environment protection and technology changing quickly along with each passing day, the newly emerging wind power electricity, as a type of reproducible resource, gains rapid development and becomes a new main force among the newly built power plant.

Under this flourishing circumstance, Pearl designs and develops a new type of low-loss transformer substation for wind power plant on the basis of the existing pad-mounted transformer and pre-fabricated transformer. It has now received wide reorganizations by customer.

Normal Service Condition:
Ambient temperature:
      Maximum: +40℃
      Minimum: -25℃
      Maximum average monthly temperature: +30°C
Relatively humidity: at 25℃
      Average daily RH not more than 95%
      Average monthly RH not more than 90%
Altitude above seal level: Less than 1000m.
Quakeproof: less than 3m/s2 horizontally and 1.5m/s2 vertically.
Installation environment: No obvious dirtiness, no explosive and corrosive gas or powder. The installation                         site should have good air ventilation and no furious vibration and shocking forces.

Note:
      If the on-site conditions are not within the above ranges, please contact us for further application information.

Main Specifications:

Rated Power kVA	Active Part	Rated Volt. V	No-load Loss W	Load loss W	Short-circuit Impedance ％	Load Current％	Vector Group
600	11-series	35000/690	790	7500	6.5	0.9	Dyn11 Yyn0
10000/690	780	6000	4.5	0.6
Amorphous Alloy	35000/690	315	7500	6.5	0.4
10000/690	300	6000	4.5	0.3
750	11-series	35000/690	940	8850	6.5	0.7
10000/690	930	7100	4.5	0.5
Amorphous Alloy	35000/690	380	8850	6.5	0.4
10000/690	360	7100	4.5	0.3
900	11-series	35000/690	1060	10350	6.5	0.7
10000/690	1050	8900	4.5	0.5
Amorphous Alloy	35000/690	440	10350	6.5	0.4
10000/690	420	8900	4.5	0.3
1300	11-series	35000/690	1430	14300	6.5	0.6
10000/690	1420	12350	4.5	0.4
Amorphous Alloy	35000/690	570	14300	6.5	0.3
10000/690	550	12350	4.5	0.2
1500	11-series	35000/690	1570	15750	6.5	0.5
10000/690	1560	13800	4.5	0.4
Amorphous Alloy	35000/690	630	15750	6.5	0.3
10000/690	600	13800	4.5	0.2
1600	11-series	35000/690	1660	16500	6.5	0.5
10000/690	1640	14500	4.5	0.4
Amorphous Alloy	35000/690	650	16500	6.5	0.5
10000/690	630	14500	4.5	0.2
2500	11-series	35000/690	2450	19500	6.5	0.5
10000/690	2310	20200	5.5	0.3
Amorphous Alloy	35000/690	970	19500	6.5	0.5
10000/690	900	20200	6	0.2

Note:
1, Yyno connection symbol is not recommended for amorphous alloy transformer.
2, The above specifications are for reference only. For more detailed or customized specifications, please contact us.

Henüz Bir Geri Dönüş Bulunmamakta