SummaCut D75
Send a free RFQ and get the supplier's best price.
Trade with confidence on Abraa
Safe and secure payments using Abraa safe trade systems
Supplier verification not completed
Pay only through Abraa to stay protected. Never pay a supplier by direct transfer.
Secure Payment
Pay through Abraa, never by direct transfer to a supplier.
Product Inspection
Book a check before shipping to confirm quality and quantity.
Buyer Protection
Get support and refunds if goods arrive not as described.
Verified Suppliers
Licence, address and on-site checks by the Abraa team.
Product Specification
| Brand | SUMMA |
| Material | Aluminum |
Product Descriptions
EGYGRAFX GULF for Printing Solutions Trading L.L.C
SummaCut D75
D75 30-inch (76 cm), D120 48-inch (122 cm), D140 54-inch (137 cm), D160 64-inch (163 cm)
|
Cut Type |
Drag knife with TurboCut and Tangential Emulation Modes |
|
|
|
|
Tool Compatability |
Blade, Pen, Pounce Tool |
|
|
|
|
Cut Widths |
D75 29.2-inch (74.2 cm), D120 47.2-inch (120 cm), D140 53.1-inch (135 cm), D160 62.2-inch (158 cm), Extended Mode: width of the material |
|
|
|
|
Cut Speed |
All SummaCut models cut at speeds up to 44 inches (112 cm) per second diagonal |
|
|
|
Axial Speed Up to 2G
|
Maximum Acceleration |
Up to 3 G diagonal |
|
|
|
|
Repeatability |
Within ± 0.004 in. (0.1 mm) on plots up to 26 ft. (8 m) long |
|
|
|
|
Tracking |
164 ft. (50 m) long |
|
|
|
|
Cut-Force |
0-400 grams of down-force, in 5 gram increments |
|
|
|
|
Replot Memory |
4 MB (buffer size: 16 MB) |
|
|
|
|
Display Languages |
English; French; German; Dutch; Italian; Spanish; Polish |
|
|
|
|
Connectivity |
USB |
|
|
|
|
Power Requirements |
AC 100V to 240V ±10% 50-60Hz, 85 VA maximum |
|
|
|
|
Dimensions |
D75 45.3 (W) x 13.8 (D) x 11.8 (H) in. 115 (W) x 35 (D) x 30 (H) cm D120 63 (W) x 26.8 (D) x 44.1 (H) in. 160 (W) x 68 (D) x 112 (H) cm D140 68.9 (W) x 26.8 (D) x 45.1 (H) in. 175 (W) x 68 (D) x 114.5 (H) cm D160 77.9 (W) x 26.8 (D) x 45.1 (H) in. 198 (W) x 68 (D) x 114.5 (H) cm |
|
|
|
|
Weight |
D75 37 lbs (17 kg), D120 92 lbs (42 kg), D140 106 lbs (48 kg), D160 119 lbs (54 kg) |
|
|
|
|
Operating Temperature |
59° to 95°F (15° to 35°C) |
|
|
|
|
Standard Accessories |
WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36° Blade Holder, 2 Standard 36° Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades. |
|
|
|
|
Optional Accessories |
Stand and basket for SummaCut D75 |
|
|
|
|
Warranty (USA) |
Two-year parts and labor limited warranty, toll-free technical support |
\
Similar Products
View all
